ACR Electronics Nauticast Y1-03-0212 Installation Manual download pdf (Page 93)

Quick Replacement Guide

Inland AIS

1. Prepare the following tools:

Screwdrivers, spanners,

User Password: [your personal password]

(Should be written to you user manual - Appendix 7.3.

The factory default password is on the display foil)

2. Read out your Transponder configuration:

This form guides you to save the most important

settings (bold marked) prior to an AIS replacement.

Voyage related settings may be stored here as well, but

we assume you know how to key them in.

Steps to do this:

Press Menu

Press 2 2.AIS Status

Press 2 2.Own Ship Data

Write down your current configuration settings:

IMO No. :

MMSI:

ShipName :

ATIS:

ShipType :

Cargo:

Length :

Beam :

Cargo :

Draught :

(Press Enter to reach 2.screen view for)

ENI:

Blue Sign:

Convoy:

Load:

Hazard:

Persons on Board:

Crew:

Support:

Int’l:

Passengers:

Reference Points:

Press Menu

Press 4 4.Ship Settings

Type in [UserPassword] Press Enter

Write down the current configuration settings here:

RefPtExt:

RefPtInt:

Blue Sign:

Press Menu

Press 5 5.Transponder Configuration

Type in [UserPassword] Press Enter

Press 7. 7.Inland AIS Configuration

Speed: <LOW*> or <High*>

Course : <LOW*> or <High*>

Heading: <LOW*> or <High*>

Blue Sign: [not avaliable] or [Used]

*(most time LOW)

Sensor Settings:

When you have connected a external GPS or Compass

to your AIS:

Press Menu

Press 5 5.Transponder Configuration

Type in [UserPassword] Press Enter

Press 5 5.Sensor Settings

Type in [ServicePassword] Press Enter

Write down the current configuration

settings here:

BaudRate Sensor1:

BaudRate Sensor2:

BaudRate Sensor3:

Press M8 Back

3. Detach the device

3.1. Bracket Mounting

3.2. Frame Mounting

4. Disconnect cables

4.1. AIS-Cable to unscrew

4.2. VHF/GPS Cable to unscrew

5. Unpack the new Transponder

New factory default password is on its display

protection foil

6. Connect cables

6.1. AIS-Cable to screw on

6.2. VHF/GPS Cable to screw on

7. Mount the replacement unit

7.1. Bracket Mounting

7.2. Frame Mounting

8. Type in the configuration settings from

above:

Following steps to type in the Configuration

MMSI/IMO – Number:

The AIS will prompt ‘ENTER MMSI NUMBER’

Press M5 OK

Type in MMSI and IMO number

Press M5 Save (AIS will Restart)

1 2 ... 88 89 90 91 92 93 94

Comments to this Manuals

No comments

ACR Electronics Nauticast Y1-03-0212 Installation Manual Page 93

Comments to this Manuals